SUMMERTIME BASEMENT MUSTINESS Q&A : Concrete Floors Often the Culprit

Q: What can I do about sky-high summertime humidity in our house? It’s 35 years old and sits entirely on a concrete pad. Indoor air quality is fine in winter, but in the warm months we smell mildew in the carpeting and over the whole place if we don’t run a dehumidifier constantly. My plan is to dig around the perimeter of the house and install 2″-thick x 12″-wide pieces of rigid foam against the sides of the concrete foundation pad, then put the earth back. Will this work?

  • Reading time = 2 1/2 minutes
  • Video watch time = 1 minute

A: I’m sorry to say that your plan probably won’t do much good. In fact, I’m certain it won’t. That’s because the source of your trouble is almost certainly the cool temperatures of the soil underneath your concrete floor, not along the sides. It’s the cold floor temperatures that’s causing the floor to become cool enough to cause warm, moist summertime air to condense on the concrete, forming droplets of liquid moisture within the carpet.

This cross section of carpet, underpad and concrete shows the dynamic that happens when warm, humid air is allowed to make its way through the carpet, condensing on the cooler concrete.

This is the same dynamic that makes basement floors especially prone to mold and mildew during summer and it’s always worse when carpet is on the floor. My theory about your situation is especially likely given the age of your home. When contractors installed slab-on-grade concrete floors like yours in the early 1980s and 90s, they rarely put meaningful amounts of insulation underneath the concrete. Many homes have no insulation under the slab at all, so the floor is picking up all the coolness of the earth. It’s this coolness that’s triggering condensation, and the air is the source of the moisture. The video animation below shows this dynamic in action.

So, what can you do? The trick is lowering indoor humidity levels, and though a dehumidifier will do this, air conditioning is more efficient. It pulls more moisture out of the air for a given amount of electricity consumed than your dehumidifier, and AC doesn’t add extra heat to your home at a time of year when you probably don’t want more heat. In fact, it makes things cooler, of course.

If you don’t have a heating system built into your concrete slab, you could add sheets of rigid foam insulation on top of the floor before new floor covering goes down, but that’s a big job best left for major renovation time. Even removing the carpet and replacing it with hard-surface flooring would help. The presence of carpet allows the air to become cooler in contact with the concrete, encouraging much more condensation. The carpet also provides food and a friendly environment for mold and mildew to grow.

One of the best ways to solve the summertime mustiness problem is by installing the right kind of basement subfloor tiles on the concrete before finished flooring goes down. DRICORE panels have a thick plastic layer on the underside and work very well in applications both above ground and below.

I hope this article helps you manage your basement (or slab-on-grade house) better. Please consider helping me cover the costs of creating and publishing content like this. Click the “buy me a coffee” button below for a safe and simple way to make a contribution. Thank you very much.

8 Shares
Tweet
Share
Share
Pin8