GKBW8420

Oh hi Fred, this is my new wagon frame. I've got the reach set fairly short because I don't want

this wagon to be any longer than it needs to be. There's my tank and here's what I'm thinking of

doing. If we got some rectangular tube I guess and I don't know what it would be maybe four by six

or something and that would take the place of the beam, the wooden beam that's usually used

for these things. I'd have one on this side, one on this side, maybe maybe one in the middle too

Not to carry the water tank, although it's gonna be pretty heavy, maybe I do want a beam in the

middle to carry the water tank but here's the part I'd like to get your take on. So these beams

they come out here, you know maybe they extend out to here or so, and then on the end of the

beam I'm envisioning a vertical piece, a square tube or something, pretty big, maybe three by

three or four by four. Fairly long, it could be a foot or a foot and a half long and the reason

for that is so that I could make the water trough holder kind of an L-shaped thing so that it fits

down into the end of this piece that's welded on the ends of the beams. Because in order for this

thing to work, the tanks got to be fairly low to the ground, but if the whole thing is permanently

built and I've got this thing that's several inches from the ground, I can't really use the

wagon for anything else. So I'm thinking when I have it in water mode, I'd have this bracket

I'd have a lug in it or something I could lower it in with a loader and then that would support

the tank and then when I want to use the wagon for something else I can just lift it off and

take it away. So I've got the tank ordered, the water trough I mean, so I think it's gonna be

about this high or so. So I'm not sure if that four by six beam is actually gonna raise the

water tank high enough so that the bottom of it, like the deck that it sits on, the wooden deck

that I'm gonna put on the metal framework is high enough so that it's above the top of the water

trough. I need to figure that out. I guess I need to get the water trough here first just to be sure

Well that's what I'm thinking. Tell me what you think. Maybe there's some better way to go about

this. Thanks Fred. Bye for now