I hope you found this content useful!
Your generous support helps me produce more practical, hands-on content that I hope you’ll find useful.
Steve Maxwell
Similar Posts
METALWORKING: Build a Tractor Toolbox From An Ammunition Box
I recently bought a new-to-me tractor and it did have any handy place to put a toolbox. But a little time in the shop with some 1/4″ x 2″ flat bar mild steel, and some John Deere green spray paint,…
Should You Choose CNC Milling or 3D Printing for Your Home Business?
Do you have a home-based, small-scale manufacturing business in mind? Computer numeric controlled (CNC) milling is one option, and so is 3D printing. Both processes can happen with equipment you buy and operate on your own, or you can farm…
METALWORKING: Learn About Forging Steel In The Home Workshop
Canada’s Handiest Man, Steve Maxwell, shows inspired homeowners Might Forge, a way to make forging metal a realistic hobby.
DOOR HINGE INSTALLATION: Watch Me Chop a Hinge Pocket for a Wooden Door I Built
Just for fun, here’s a two-minute peek over my shoulder as I use a super-sharp chisel and mallet to create a pocket for a hand-forged hinge for a wooden door I built. This is how all traditional hinges are installed.
Impact Drivers Best for Driving Screws
If you’re planning to build a deck, dock, fence, gazebo, or any other outdoor building project that includes screws, you need to know about a power tool that can make the job of driving screws so much better. Deck screws…
In general, should all woods, including hardwoods, be pre-conditioned before staining?
I’m making a small hall bench using maple and cherry wood, and I have a question about finishing. I intend to colour the whole thing with a cherry stain. Is it necessary to pre-condition the wood first? No, I wouldn’t…
