0:00
The last part of roof construction involves applying the actual roof
0:04
sheeting and in this case I chose some clear material, clear corrugated
0:12
material by a company called SunTuff. I'm sure there are other options, this
0:18
isn't the only stuff to use, but it is very impressive. You know we've had these
0:23
chicken houses here at our place for a number of years now and there's been
0:27
absolutely no deterioration. I had a little offcut that I experimented with a
0:33
couple of inches wide and several feet long and there was nothing I could do to
0:38
break that thing. I could practically tie it in knots and and it wouldn't crack. So
0:42
it's held up very well, it works quite well. The only thing that's not shown
0:47
here on the plans are some corrugated support strips. So these would be plastic
0:53
strips made by the SunTuff people to go with this product and it's a it's a
0:59
strip that follows the profile shape and supports the roofing material when it
1:04
goes down. So the strips would fasten here, there's a kind of
1:11
strip that that follows this direction of the roofing and then there's another
1:17
style of strip that goes across like this. The bottom line is that wherever
1:23
there's wood to support things there needs to be a support strip of one sort
1:29
or another and then there are some washer headed roofing screws that go
1:35
down through. I pre-drilled for that and it secures it very well. It lets the sun in
1:42
when you want it in the wintertime but doesn't cause any excess heat in the
1:48
summertime because you can hinge the lid open and if you wanted you could put
1:53
some sort of shade cloth over it as well if you live in a very sunny and warm
1:58
place. So that's the way this stuff works. Other corrugated options would work too
2:02
but if you want to have some a nice warm interior in the wintertime you're going
2:09
to want to go with a clear product. SunTuff, I got the clearest product they
2:13
could offer. I'm pretty far up north we have some serious winters here but they
2:18
have different grades of it as well. You can get more or less tinting depending
2:22
on where you live. But just to recap with the lid here we have the frame, this is
2:27
the front cap, the side cap, there would be another side cap here too but nothing on
2:33
the back because as I said this lid needs to hinge open and if there was an
2:38
overhanging strip at the back it would stop that from happening. So the hinges
2:43
fasten to the body of the house as well as the back edge, the back uncapped edge
2:49
of the the roof right back here
