I hope you found this content useful!
Your generous support helps me produce more practical, hands-on content that I hope you’ll find useful.
Steve Maxwell
Similar Posts
WORKSHOP: How to Revive Old Hardware & Tools
Question: What’s the best way to clean rust and dirt off of an old door lock? It’s seized and the outside is rusty right now, but it looks like a nice old lock with potential. Answer: Good for you for…
How to Remove Mold Stains (Oxygen Cleaner Method That Works)
Mold stains can be stubborn—especially on wood and outdoor surfaces where they soak in and darken over time. Oxygen-based cleaners can remove these stains surprisingly well, but only if you use them the right way. In this test, you’ll see…
GAP-FREE WOODWORKING JOINTS: Simple Trick Makes It Easy
Sometimes a little woodworking trick can deliver a lot of value. That’s the case with an operation called “kerfing”. Click above to watch how I used kerfing to tighten up a visible joint on a deck project that’s got more…
BANDSAWS: What Type Is Best Suited to Your Workshop?
There’s arguably no better tool for cutting large sweeping curves than a well-tuned bandsaw. But a quality bandsaw does a lot more than just cut curves. It can also cut tenons and smaller rabbets, and you can use it to…
Making Shoes the Old Fashioned Way
My oldest daughter, Katherine, has the hands-on creative bug like me, and in her case it shows up in her interest in making historical leather shoes from scratch using the old methods. (She also makes and wears corsets, but that’s…
Building a Deck Foundation on Bedrock
A while back I got an email from a cottage owner asking about options for building a deck on bedrock. This is a common situation in many areas with lakes and cottages. He asked in particular about a foundation on…
